Wind River Spas Journey Instruction Manual download pdf (Page 48)

Spa Operator’s Guide

GENERAL XM OVERLAY

DIAGNOSTIC MESSAGE

The high limit circuit is tripped. Usually, the kinetic heating

protection or the current monitoring circuity will shut down the

heater before the error can occur.

Add cold water to spa and let heater cool down. Reset spa pack

using current breaker.

Temperature probe defective.

This error clears itself when the error condition is no longer present.

Reset the breaker if the error is still there replace the In.therm

The ID number of the in.therm vs the InXm is wrong (CE/UL)

There is a CE In.Therm connected to a UL In.Xm or vice versa.

Change he In.Therm or In.Xm to the appropriate version.

For all the above, the system has not detected a current change

when turning on or off the device.

Make sure the device is correctly connected (plug is sealed). If

possible, manually change the output status (on/off) of the device

and cycle through all possible states (i.e low and high speeds). Reset

spa pack. If error does not clear, problem is probably with the device,

it will need to be serviced.

This is not an error message

A solid Sc means the system is scanning all the output to learn the

current draw of every accessory connected.

A scan error was detected

Every time a low-level option is changed, the system must “learn” the

currents associated to each output/load. During this learning process,

the device(s) connected to OUT8 (direct output, no relay) must be

disconnected (or off). If, not the system will report this code. Once the

load is correctly disconnected, the breaker has to be reset than the

user needs to restart the learning process by selecting the low level

conﬁguration and set the breaker Once the learning if ﬁnished, the

accessories connected to OUT8 may be reconnected.

This is not an error message

The breaker size selected is lower than the total current of each

output. The In.Xm will manage the current accordingly.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54

No comments

Wind River Spas Journey Instruction Manual Page 48