Wind River Spas Journey Instruction Manual download pdf (Page 43)

Spa Operator’s Guide

GENERAL SPA MAINTENANCE

Proper Maintenance For Your Spa Pillows

• Your spa pillows need to be rinsed periodically to remove any

chemical residue. This should help to eliminate pillows becoming

stiff and discolored.

• If spa is not to be used for a period of time, pillows should be

removed. Pillow life will be extended.

• Always leave the corner open for 15 minutes in order to prevent of

gas from damaging your spa pillows, cover and other critical

parts. Signs of off gas damage include but are not limited to

pillows peeling and bubbling, cover failing prematurely, plastics

failing, etc.

Proper Maintenance For Your Spa Fountain Jets

• In order to keep you fountain jets operating properly,

following these instructions in sequence:

• Turn off fountain jets

• Remove outer ring by turning face counter clockwise

• Remove internal jet insert with a pair of needle nose pliers.

• Clean plastic ﬁlter at the back of the jet insert so all holes

are free of debris.

• Reinstall jet insert and outer ring.

Please note: We not recommend the fountain jets to be left on when spa

cover is closed, this may damage your spa cover.

Proper Maintenance For Your Spa Surface

Quarite Plus

Disclaimer: This spa may insulated with high-density ure-

thane foam for structural support and energy efﬁciency. When empty of

water and left in direct sunlight without the spa cover in place, the spa

is vulnerable to ultra violet or solar damage. Temperatures generated by

sunlight that become concentrated in the shell surface causing the shell

material to delaminate from the urethane foam backing. This occurrence

is considered abuse and may result in surface blisters, bubbles or large

layer delamination. This occurrence is not covered under warranty. The

spa cover must be kept on the spa while empty of water.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 53 54

No comments

Wind River Spas Journey Instruction Manual Page 43