Wind River Spas Journey Instruction Manual Page 44

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 43
Spa Operators Guide
44
GENERAL XE TOPSIDE CONTROLS TERMS
Pump 1 LightPump 2
Econo Filter Up Down
Pump 1 LightPump 2
Econo Filter Up Down
Pump 1 LightPump 2
Econo Filter Up Down
Pump 1 LightPump 2
Econo Filter Up Down
Pump 1 LightPump 2
Econo Filter Up Down
Pump 1 LightPump 2
Econo Filter Up Down
Pump 1 LightPump 2
Econo Filter Up Down
The Pump 1 Button - Press PUMP 1 on at low speed. Press
a second time to turn pump on high speed. Press a third time
to turn pump off. When at high speed, a built-in timer turns
pump off after 20 minutes and when at low speed after 2 hours,
unless manually deactivated first.
The Pump 2 Button - Press PUMP 2 on. Press a second
time to turn Pump 2 off. A built-in timer automatically turns
pump off after 20 minutes, unless pump has been manually
deactivated.
The Light Button - Press Light to turn light on. Pressing a
second time turns off. A built-in timer automatically turns light
off after 2 hours, unless manually deactivated first.
The Econo Button - Press and hole Econo key for 5 seconds
to switch from Normal mode to Economy mode. In Economy
mode, system maintains temperature at the desired Set Point
during filter cycles only. Set Point is 20˚F (11˚C) below the
Normal mode Set Pointe for the rest of the time. In Economy
mode, the display will toggle between the current water
temperature and the “Econo” message.
The Filter Button - Press and hold Filter key until the display
show “xx”, representing the currently set filter cycle duration in
hours.
The UP Button and The Down Button - Use Up or Down
arrow keys to regulate water temperature. The temperature
setting will be displayed for 5 seconds to confirm your new
selection.
The “Set Point” indicator displays the desired temperature,
NOT the current water temperature!
Water temperature can be adjusted by increments from 59
to 104˚ F (15˚ to 40˚ C).
Press and hold Light key for 5 seconds to display water
temperature in either Fahrenheit (˚F) or Celsius (˚C).
Page view 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 53 54

Comments to this Manuals

No comments