Wind River Spas Journey Instruction Manual download pdf (Page 27)

Spa Operator’s Guide

SET-UP & DELIVERY GUIDELINES

Electrical Requirements

• Your 220 Volt spa pack will require a double pole 50 amp dedicated

GFCI, ground fault circuit breaker.

Caution: Connect only to a circuit protected by a Class a ground fault

circuit interrupter

Attention : connecter uniquement à un circuit Protégé par un

disjoncteur differentiel de classe a

• Extension cords are not to be used in conjunction with operation of

the spa. Low voltage damage could result, which is not covered by

warranty.

• If you have any doubts, have your electrical system checked by a

licensed electrician.

• Use copper conductors only.

Employer uniquement des conducteurs de cuivre

It is the customer’s responsibility to acquire necessary permits

and to arrange for installation and hook up of the electrical power

by a licensed electrician.

NOTE!

3” Concrete Pad

Disconnect must be located

insight and within 5 feet

(1.52m) from inside walls

of the spa.

Service Panel

Disconnect Switch

WARNING

TAG

Warning Tag

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

No comments

Wind River Spas Journey Instruction Manual Page 27